Lafeme Lucci/Leca Smart Toilet

Lafeme Smart Toilet

• Clean with soft wet cloth.
• If necessary, clean with neutral detergent, then with water.
• After cleaning ceramic, dry the detergent residue on the plastic with a soft cloth.
• To avoid water, please dry with a soft cloth after cleaning to avoid electrical malfunction.

Filter

1. Close water inlet valve
2. Remove off the filter net
3. Clean up the sewage on the filter with water, clean sewerage piece with brush
4. Install back the filter and make sure to tighten well. Leakages may occur if not tightened correctly.

Lafeme

Lafeme is committed to creating beautiful, stylish and highly functional products that stand the test of time. Their ranges of smart toilets and bidet seats are not only highly practical, they are a joy to use and add a wonderful hotel luxury and sophistication to your new bathroom.

Lafeme Smart Toilets

• Requires 220-240V power supply.
• Dissembly, modification or repair of Lafeme smart toilets by users is strictly prohibited. If customers have any questions, please call Lafeme's service center.
• Do not spray water directly on the product or power plugs and do not touch the power plug or cord with wet hands.
• Do not connect power supply before the bidet or toilet is completely installed, with water supply connected and water supply valve opened.
• Low temperature burns may occur from prolonged contact with the warm seat. To avoid problems, set the temperature low or turn it off.
• Do not put heavy weights on the product.
• Do not overextend the the cover seat.
• Do not pull or bend the connecting hose.
• Do not spray urine into the nozzle or the dryer hole or block the dryer hole with the object.
• If you are planning to spend an extended period of time without using the smart toilet or bidet, remove the power plug and drain the water tank to avoid backteria build up.

Failure to follow the above safety instructions may cause product faults or injury to your person.

Here are some important things to know when choosing a toilet for your bathroom or powder room. Two of the most important considerations are:

1. where is the water going to come into the toilet (water inlet)?
2. where is the waste going to go (waste trap)?

The diagram below shows possible water inlets and waste traps to help you decide what will work best for you. If you want to avoid changing the existing plumbing, you will need to make sure your new toilet inlet and outlet fits the old pipework.

Water Inlet

Water can come into the cistern from one of two places. Rear entry is where the tap is inside the cistern and bottom inlet or entry is where the tap is in the wall beside the toilet.

Waste Trap

For the waste leaving the toilet, P-trap refers to a sewerage pipe through the wall (think p for plaster). S-trap is where the sewerage goes through the floor (think s for sewerage).

Setout

A commonly used measurement to help align your new toilet is the setout. This refers to the distance to the centre of the waste outlet.

S-trap setout = the distance from the finished wall to the centre of the waste pipe in the floor.

P-trap setout = the distance between the finished floor to the centre of the waste pipe in the wall.

Make sure you know which trap will fit your existing plumbing and the setout distance before purchasing a toilet.

Other Factors

With hundreds of toilet suites on the market, it can be quite confusing and difficult to make a decision. Once you have the technical requirements down, the most important thing is that you choose a toilet that makes you feel comfortable. 

You may like to consider the type of toilet, its efficiency, the size, or just the one that looks best to you.

If you need any help or have any questions, feel free to ask our friendly customer experience team or head over to our toilet FAQ page.

Lafeme offers a 2 year limited warranty on Smart Toilets and Bidets*

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact Lafeme on the phone number (03) 9794 0243 or by email info@alexgroupaus.com.au. Their customer service team will professionally deal with your enquiry.

For peace of mind when buying with Bathroom Warehouse, you are covered by:

• Insurance on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
• Fee free change of mind policy if changing your mind within 24 hours of purchasing

Full details of our returns & exchanges policy can be viewed here