Fienza RAK Washington Front Lever Close-Coupled Toilet Suite, S-Trap

Fienza

Fienza bathware fixtures and fittings are not only consistently excellent quality, but continually deliver new and innovative designer styles that will excite!

Fienza was founded in 2005, with a passion for bringing exciting solutions to bathrooms across Australia, and has grown every year since.

They source, import and distribute beautiful, high quality bathroom fixtures and fittings. They demand excellence and quality, working together with quality retailers to meet their discerning needs. Their commitment to international quality standards has ensured that Fienza continues to be the preferred choice for beautiful bathrooms all over Australia.

Fienza Toilets

• The toilet seat may be removed for cleaning - depress the quick release buttons and lift up.
• Clean only with a soft cloth or sponge using warm water and mild soap or detergent. Do not use any abrasive cleaning materials.
• Do not use any solvents or corrosive liquids.

Fienza Toilets

• 1 Year labour for product fault (not including wear and tear)

Ceramics

• 5 Years replacement product

R&T Internal System (Inlet and Valves)

• 3 Years replacement parts
• 1 Year labour

Geberit Concealed Cisterns (Tanks and Frames)

• 15 Years replacment product or parts

Geberit Concealed Cisterns (Inlet and Outlet Valves)

• 3 Years replacement parts
• 1 Year labour

Seat & Hinges

• 1 Year replacement product or parts

Link and Flush Pipes

• 1 Year replacement product or parts

Button Assembly

• 1 Year replacement product or parts

For full Fienza warranty terms & conditions please visit the Fienza website.

To make a warranty claim please call Fienza on (07) 3490 6700 for assistance.

For piece of mind when buying with Bathroom Warehouse, you are covered by:

• Our 30 day return or exchange policy
• Insurance on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
• Fee free change of mind policy if changing your mind within 24 hours of purchasing (if your goods have not been shipped out)

Full details of our returns & exchanges policy can be viewed here

Here are some important things to know when choosing a toilet for your bathroom or powder room. Two of the most important considerations are:

1. where is the water going to come into the toilet (water inlet)?
2. where is the waste going to go (waste trap)?

The diagram below shows possible water inlets and waste traps to help you decide what will work best for you. If you want to avoid changing the existing plumbing, you will need to make sure your new toilet inlet and outlet fits the old pipework.

Water Inlet

Water can come into the cistern from one of two places. Rear entry is where the tap is inside the cistern and bottom inlet or entry is where the tap is in the wall beside the toilet.

Waste Trap

For the waste leaving the toilet, P-trap refers to a sewerage pipe through the wall (think p for plaster). S-trap is where the sewerage goes through the floor (think s for sewerage).

Setout

A commonly used measurement to help align your new toilet is the setout. This refers to the distance to the centre of the waste outlet.

S-trap setout = the distance from the finished wall to the centre of the waste pipe in the floor.

P-trap setout = the distance between the finished floor to the centre of the waste pipe in the wall.

Make sure you know which trap will fit your existing plumbing and the setout distance before purchasing a toilet.

Other Factors

With hundreds of toilet suites on the market, it can be quite confusing and difficult to make a decision. Once you have the technical requirements down, the most important thing is that you choose a toilet that makes you feel comfortable. 

You may like to consider the type of toilet, its efficiency, the size, or just the one that looks best to you.

If you need any help or have any questions, feel free to ask our friendly customer experience team or head over to our toilet FAQ page.